Selloff or Market Correction? Either Way, Here's What to Do NextSee Overvalued Stocks

Signs Manufacturing Cycle Has Peaked As PMI Slips To 5-Month Low

Published 05/04/2018, 08:38
Updated 05/03/2021, 15:50
GBP/USD
-
JPM
-
  • Global PMI slips further from near seven-year high
  • Eurozone economies see strongest expansion, though North America closes the gap. Growth remains lacklustre in Asia
  • Inflationary pressures remain elevated, and intensify in North America
  • Global manufacturing growth slowed to a five-month low in March, though remained robust by recent standards. Regional trends varied markedly, however, with faster growth in the US helping North America to close the gap with the slowing eurozone economy. Asia remained on a sluggish growth path.

    Capacity constraints meanwhile led to sellers regaining pricing power, notably in the US and Europe.

    Growth cools from recent highs

    The headline JPMorgan (NYSE:JPM) Manufacturing PMI, compiled by IHS Markit, fell for a third successive month, down from 54.1 in February to 53.4 in March. However, while the decline in the PMI so far this year has indicated slowing growth of business activity, December’s reading had been the highest for nearly seven years, and the March index remains above the average recorded in 2017, underscoring the resilient steady pace of expansion being signalled by the surveys.

    Global manufacturing PMI

    Historical comparisons with official data suggest that the latest PMI is consistent with worldwide factory output growing at an annual rate of approximately 4% (over the past two decades, the PMI has exhibited an 86% correlation with the official manufacturing output data, with the PMI acting with a four-month lead).

    Moreover, of the 30 countries for which survey data were available, only three recorded PMI readings below 50, signalling contraction, and even in these cases (Thailand, South Korea and Malaysia) the deterioration signalled were only modest.

    Global manufacturing trends

    The fastest rates of expansion were again seen in the eurozone and its neighbouring countries. The Netherlands headed up the global rankings, followed by Germany and Austria.

    However, with Canada and the US ranked fifth and sixth place respectively, North America is also clearly enjoying a solid manufacturing upturn. As eurozone manufacturing growth showed further signs of coming off the boil to sit at an eight-month low, growth accelerated to a three-year high in the US and remained close to recent seven-year highs in Canada.

    The UK also enjoyed further strong manufacturing growth, sitting at eighth place in the rankings, buoyed by the weak pound and strong demand in key export markets.

    Taiwan was again the highest-ranking Asian economy in an otherwise ongoing unexceptional performance for the region. An Asian PMI reading of 51.4 compared to 55.3 for North America and 56.6 for the eurozone, dragged down to a large extent by growth in China slipping to a four-month low.

    Manufacturing PMIs for major economies

    Capacity constraints

    At least some of the slowdown appears to have been the result of capacity constraints, as suppliers were often reported to have struggled to cater for strong demand, notably in Europe. Global supplier delivery times lengthened to the greatest extent since May 2011, with delays close to 20-year survey records in the eurozone and at four-year high in North America.

    An upshot of the delays was the ability of suppliers to hike prices, with manufacturers increasingly eager to ensure production needs were satisfied. Although global rates of input cost and factory gate price inflation both cooled slightly for a second successive month, rates hit six-and-a-half year highs in North American and remained especially elevated in the eurozone.

    Global supply delays and prices

    Upbeat outlooks in the US and China

    While the global PMI data hint at the manufacturing growth cycle having peaked at the turn of the year, forward–looking sentiment data suggest the global slowdown indicated by the headline PMI may be at least limited in scale. Companies’ own views on their output levels in a year’s time nudged up to the highest since February 2015.

    In a month during which worries about trade wars and tariffs intensified, it was interesting to see expectations for the year ahead improve in both the US and China, though expectations slipped lower in the eurozone and the rest of Asia.

    "Disclaimer: The intellectual property rights to these data provided herein are owned by or licensed to Markit Economics Limited. Any unauthorised use, including but not limited to copying, distributing, transmitting or otherwise of any data appearing is not permitted without Markit’s prior consent. Markit shall not have any liability, duty or obligation for or relating to the content or information (“data”) contained herein, any errors, inaccuracies, omissions or delays in the data, or for any actions taken in reliance thereon.

    In no event shall Markit be liable for any special, incidental, or consequential damages, arising out of the use of the data. Purchasing Managers' Index™ and PMI™ are either registered trademarks of Markit Economics Limited or licensed to Markit Economics Limited. Markit is a registered trade mark of Markit Group Limited.

Latest comments

Loading next article…
Risk Disclosure: Trading in financial instruments and/or cryptocurrencies involves high risks including the risk of losing some, or all, of your investment amount, and may not be suitable for all investors. Prices of cryptocurrencies are extremely volatile and may be affected by external factors such as financial, regulatory or political events. Trading on margin increases the financial risks.
Before deciding to trade in financial instrument or cryptocurrencies you should be fully informed of the risks and costs associated with trading the financial markets, carefully consider your investment objectives, level of experience, and risk appetite, and seek professional advice where needed.
Fusion Media would like to remind you that the data contained in this website is not necessarily real-time nor accurate. The data and prices on the website are not necessarily provided by any market or exchange, but may be provided by market makers, and so prices may not be accurate and may differ from the actual price at any given market, meaning prices are indicative and not appropriate for trading purposes. Fusion Media and any provider of the data contained in this website will not accept liability for any loss or damage as a result of your trading, or your reliance on the information contained within this website.
It is prohibited to use, store, reproduce, display, modify, transmit or distribute the data contained in this website without the explicit prior written permission of Fusion Media and/or the data provider. All intellectual property rights are reserved by the providers and/or the exchange providing the data contained in this website.
Fusion Media may be compensated by the advertisers that appear on the website, based on your interaction with the advertisements or advertisers.
© 2007-2024 - Fusion Media Limited. All Rights Reserved.